top of page
CORROSION effect
avaliable colours:
phases of the effect application:
phase I: Apply with a venetian plastering trowel a smooth coat of plaster upon the substrate primed with Bonding Primer.
phase II: Apply with an atomizer the Rust Activator on the plaster coat. Carry out application in phases in case of large surfaces – apply activator on areas 1-2 m² large.
phase III: Gently touch decoration with a sponge in order to collect excessive activator and eliminate damp patches. Leave to dry completely.
phase IV: In order to form more textured surface, approx. after 6 hours, it is possible to apply locally an additional second coat of plaster. It is applied with a sponge. This way one can form points imitating strong sheet corrosion.
phase V: Spray with activator just after application and gently press with a sponge.
phase VI: Coat the surface with Decorative Varnish not earlier than on the second day since application. Application of varnish stops the process of corrosion – the longer the plaster corrodes the prettier and more diversified colours will form.
products necessary for the effect application and their average consumption:
(click a product to find more details)
Bonding Primer
approx. 7 m²/kg
Industrial Rust
approx. 1 m²/kg
Rust Activator
50-70 ml/m²
Decorative Varnish
approx. 10 m²/l
bottom of page